# Configuration for the ipmi-fancontrol scripts and daemon.
#
# Copy to conf/ipmi-fancontrol.conf next to the scripts and lock it down:
#   cp conf/ipmi-fancontrol.conf.example conf/ipmi-fancontrol.conf
#   chmod 0600 conf/ipmi-fancontrol.conf
#
# The scripts look for it relative to their own location, so this works both in a
# checkout and deployed at /opt/ergosteur. Override with IPMI_FANCONTROL_CONFIG.

# How to reach the BMC.
#   open    - local /dev/ipmi0, needs no credentials or network (recommended
#             on the host itself; requires the ipmi_si and ipmi_devintf modules)
#   lanplus - over the network, using the host/user/password below
IPMI_INTERFACE=open

# Only used when IPMI_INTERFACE=lanplus.
IPMI_HOST=169.254.0.1
IPMI_USER=fancontrol
# Read by ipmitool -E, so it never appears in the process table.
IPMI_PASSWORD=changeme

# Fan duty held while the CPUs are cool, as a raw hex byte (0x15 = 21%).
FAN_SPEED=0x15

# --- Daemon settings (ipmi-fancontrol-daemon only) ---

# At or above this CPU temperature in degrees C, hand control back to the BMC's
# automatic curve so the fans can actually ramp.
CPU_TEMP_THRESHOLD=70

# Cool back down to (CPU_TEMP_THRESHOLD - CPU_TEMP_HYSTERESIS) before the fixed
# speed is re-engaged. Stops the fans oscillating around the threshold.
CPU_TEMP_HYSTERESIS=5

# Seconds between temperature checks.
CHECK_INTERVAL=60

# Dell raises the fan floor whenever it sees a third-party PCIe card. Set true to
# suppress that, which is usually what you want with aftermarket NICs or HBAs.
DISABLE_THIRD_PARTY_PCIE_COOLING_RESPONSE=false