# Install as /etc/nut/ups.conf (root:nut, 0640).
#
# The section name is what clients ask for. Synology DSM only ever requests
# "ups", so renaming this section will stop DSM from finding the UPS.
#
# The values below are an example from a CyberPower CP1500PFCLCDa. Get the ones
# for your own unit with:
#
#     nut-scanner -U -q
#
# Do not copy its bus, device or busport lines: those pin the entry to a physical
# USB port and break on replug. port = "auto" scans the bus instead.
#
# vendorid and productid identify the model; product and serial pin the entry to
# one specific unit. Drop those two if you want the config to survive swapping in
# a different UPS of the same model.

maxretry = 3

[ups]
	desc = "CyberPower CP1500PFCLCDa"
	driver = "usbhid-ups"
	port = "auto"
	vendorid = "0764"
	productid = "0601"
	product = "CP1500PFCLCDa"
	serial = "CXXPS0000000"
	vendor = "CPS"