feat: add fixed-mode entry point scripts for the usual run modes

stories.sh / profiles.sh / full-sweep.sh wrap gdl-cron.sh with the
mode already chosen, so it never has to be remembered or typed.
reels-all.sh runs reels-sync.sh once per profile in
artms_account_links.txt (reusing gdl-sync.py's own URL-file parser,
so it can't drift from what profiles.sh tracks), the scripted version
of the six-profile loop run by hand on 2026-09-03.

Co-Authored-By: Claude Sonnet 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011qAds5qr7nZRq5R4yAuxUk

TOOLING.md

@@ -30,14 +30,22 @@ with no deploy or restart.
 ```sh
 ssh mattellite
 
-~/gdl/gdl-cron.sh stories     # ~1 min.  DO THIS OFTEN - stories die in 24h
-~/gdl/gdl-cron.sh profiles    # ~5 min.  posts, reels, highlights, stories
+~/gdl/stories.sh      # ~1 min.    DO THIS OFTEN - stories die in 24h
+~/gdl/profiles.sh     # ~5 min.    posts, highlights, stories (not reels -- see below)
+~/gdl/reels-all.sh    # ~15-20 min. reels, all six profiles, by scrolling
+~/gdl/full-sweep.sh   # rarely, ~420 requests. Read its own comment first.
 ```
 
-`profiles` covers everything, so it is the one to run if you only run one — but
-it is no substitute for `stories`, because a story posted and expired between
-two `profiles` runs is simply gone. Both are safe to run back-to-back; the
-`--min-interval` floor makes a repeat a no-op rather than a re-fetch.
+Fixed-mode entry points around `gdl-cron.sh`/`reels-sync.sh`, so the mode
+never has to be remembered or typed — each just runs its own thing with the
+right flags already set. `profiles.sh` covers every surface gallery-dl's API
+still reaches, so it is the one to run if you only run one, but it is no
+substitute for `stories.sh` (a story posted and expired between two runs of
+it is simply gone) or `reels-all.sh` (`/api/v1/clips/user/` is blocked --
+see "Reels: the API is blocked" below -- `profiles.sh` silently fails that
+one surface every time, by design, until that changes). All four are safe to
+run back-to-back; the `--min-interval` floor makes a repeat a no-op rather
+than a re-fetch.
 
 Then check <https://instaarchive.ergosteur.com> — new posts appear without a
 redeploy. The archive index re-reads a directory when its mtime changes.
@@ -54,9 +62,10 @@ redeploy. The archive index re-reads a directory when its mtime changes.
 - `400 Bad Request` on `/api/v1/feed/reels_media/` — the account is behind a
   scraping-warning interstitial; check the browser before anything else.
 
-Long runs: `setsid nohup ~/gdl/gdl-cron.sh profiles >/dev/null 2>&1 &` and
-`tail -f ~/gdl/logs/$(ls -1t ~/gdl/logs | head -1)`. Nothing reaches the
-archive until a run finishes, so killing one midway is safe.
+Long runs: `setsid nohup ~/gdl/profiles.sh >/dev/null 2>&1 &` (or `full-sweep.sh`
+/ `reels-all.sh`) and `tail -f ~/gdl/logs/$(ls -1t ~/gdl/logs | head -1)`.
+Nothing reaches the archive until a run finishes, so killing one midway is
+safe.
 
 ## Safety net: a global gallery-dl config
 
@@ -575,6 +584,12 @@ slower by design (real scrolling, not an API call) — both good reasons not
 to run this unattended without deciding that deliberately. Today it is a
 per-profile, by-hand tool only.
 
+For all six ARTMS profiles in one go, `~/gdl/reels-all.sh` just calls
+`reels-sync.sh` once per profile in `artms_account_links.txt`, same
+reasoning as above — real scrolling, so still by hand. Run 2026-09-03:
+`official_artms` alone has 609 real reels and took ~14 minutes of scrolling;
+the whole six-profile run took about 15 minutes total, 2 new reels found.
+
 ### Where a shared reel lands
 
 A reel found on one profile's `/reels/` page is not necessarily *owned* by

scripts/full-sweep.sh

@@ -0,0 +1,8 @@
+#!/bin/bash
+# Rarely: every surface, no --abort -- walks each profile to the end, ~420
+# requests. The only run that notices posts EDITED after they were archived
+# (e.g. a caption added later -- see TOOLING.md "Reels: the API is blocked"
+# for how that showed up), and by far the most expensive thing here. Read
+# TOOLING.md before running this; prefer running it by hand, not on a timer.
+set -eu
+exec "$(dirname "$0")/gdl-cron.sh" full-sweep "$@"

scripts/profiles.sh

@@ -0,0 +1,6 @@
+#!/bin/bash
+# Routine run: every surface, --abort 50 (only gdl-cron.sh's "profiles" mode
+# does this), ~5 min. Covers everything but is no substitute for stories.sh --
+# a story posted and expired between two runs of this is simply gone.
+set -eu
+exec "$(dirname "$0")/gdl-cron.sh" profiles "$@"

scripts/reels-all.sh

@@ -0,0 +1,56 @@
+#!/bin/bash
+# Run reels-sync.sh for every tracked ARTMS profile, one after another.
+# TOOLING.md ("Reels: the API is blocked, scrape by scrolling instead")
+# covers what this actually does and why it exists; this is just the loop
+# version of running reels-sync.sh six times by hand, which is what the
+# 2026-09-03 run was before this script existed.
+#
+# Deliberately not wired into gdl-cron.sh or a timer -- same reasoning as
+# reels-sync.sh itself: it drives your actual browser session and is slower
+# by design, both good reasons to run it deliberately, not unattended.
+#
+# Usage: ./reels-all.sh
+#   GDL_ARTMS_LINKS=/path/to/list ./reels-all.sh   # override the profile list
+set -eu
+
+GDL_HOME="${GDL_HOME:-$HOME/gdl}"
+LINKS="${GDL_ARTMS_LINKS:-$GDL_HOME/artms_account_links.txt}"
+GDL_PYTHON="${GDL_PYTHON:-$HOME/.local/share/pipx/venvs/gallery-dl/bin/python3}"
+
+if [ ! -f "$LINKS" ]; then
+  echo "profile list not found: $LINKS" >&2
+  exit 2
+fi
+
+# Same parser gdl-sync.py uses for --urls-file (URLs or bare usernames, #
+# comments, blank lines, duplicates dropped), reused so this never drifts
+# from what a routine profiles.sh run actually tracks.
+mapfile -t PROFILES < <("$GDL_PYTHON" -c "
+import sys, importlib.util
+from pathlib import Path
+spec = importlib.util.spec_from_file_location('gdl_sync', Path('$GDL_HOME/gdl-sync.py'))
+gdl = importlib.util.module_from_spec(spec)
+sys.modules['gdl_sync'] = gdl
+spec.loader.exec_module(gdl)
+for p in gdl.read_urls_file(Path('$LINKS')):
+    print(p)
+")
+
+if [ "${#PROFILES[@]}" -eq 0 ]; then
+  echo "no usable profiles in $LINKS" >&2
+  exit 2
+fi
+
+echo "=== reels-all: ${#PROFILES[@]} profile(s) $(date -Is) ==="
+status=0
+for p in "${PROFILES[@]}"; do
+  echo "=== starting $p ==="
+  if ! "$(dirname "$0")/reels-sync.sh" "$p"; then
+    status=1
+    echo "=== $p FAILED ===" >&2
+  fi
+  echo "=== finished $p ==="
+done
+
+echo "=== reels-all: exit $status at $(date -Is) ==="
+exit "$status"

scripts/stories.sh

@@ -0,0 +1,9 @@
+#!/bin/bash
+# Daily run: stories only, ~1 min. The one surface that cannot be backfilled
+# -- do this often. See TOOLING.md "Quick reference" for the full picture.
+#
+# Just a fixed-mode entry point so you don't have to remember gdl-cron.sh's
+# mode argument; override pacing/paths the same way gdl-cron.sh does, with
+# GDL_* env vars (see gdl-cron.sh's own comments for what's available).
+set -eu
+exec "$(dirname "$0")/gdl-cron.sh" stories "$@"